Try polling with delay

src/main.rs

@@ -11,8 +11,7 @@ use hal::{
         timer::{self, TimerIFace},
         HighSpeed, LEDC,
     },
-    uart, Uart, /*Delay*/
+    uart, Delay, Uart, IO,
-    IO,
 };
 
 use si5351::{Si5351, Si5351Device};
@@ -20,11 +19,10 @@ use si5351::{Si5351, Si5351Device};
 #[entry]
 fn main() -> ! {
     let peripherals = Peripherals::take();
-    //let uart = peripherals.UART0;
     let mut system = peripherals.DPORT.split();
     let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);
     let clocks = ClockControl::max(system.clock_control).freeze();
-    //let mut delay = Delay::new(&clocks);
+    let delay = Delay::new(&clocks);
 
     let serial = { uart::Uart::new(peripherals.UART0, &mut system.peripheral_clock_control) };
 
@@ -34,7 +32,6 @@ fn main() -> ! {
     // this requires a clean rebuild because of https://github.com/rust-lang/cargo/issues/10358
     esp_println::logger::init_logger_from_env();
     log::info!("Logger is setup");
-    //println!("Hello world!");
 
     let i2c = I2C::new(
         peripherals.I2C0,
@@ -46,13 +43,12 @@ fn main() -> ! {
     );
     log::info!("I2C Initialized");
 
-    //i2c.write(0b0110_0000, &[0x64]);
-
     let mut clock = Si5351Device::new_adafruit_module(i2c);
     match clock.init_adafruit_module() {
         Ok(_) => {
             log::info!("Si5351 Initialized succesfully");
-            main_loop(clock, serial);
+            clock.set_freq(1_000_000).unwrap();
+            main_loop(clock, serial, delay);
         }
         Err(e) => {
             match e {
@@ -88,14 +84,18 @@ fn main() -> ! {
                 })
                 .unwrap();
 
-            main_loop(ledc, serial);
+            main_loop(ledc, serial, delay);
         }
     }
 }
 
-fn main_loop<T: Clockable, U: _esp_hal_uart_Instance>(mut clock: T, mut serial: Uart<'_, U>) -> ! {
+fn main_loop<T: Clockable, U: _esp_hal_uart_Instance>(
+    mut clock: T,
+    mut serial: Uart<'_, U>,
+    mut delay: Delay,
+) -> ! {
     loop {
-        let freq = read_freq(&mut serial);
+        let freq = read_freq(&mut serial, &mut delay);
         log::info!("Got Freq: {}", freq);
         match clock.set_freq(freq) {
             Ok(_) => log::info!("Set frequency to {}", freq),
@@ -136,13 +136,6 @@ where
         }
     }
 }
-struct Dummy;
-impl Clockable for Dummy {
-    fn set_freq(&mut self, freq: u32) -> Result<(), ()> {
-        log::info!("Dummy set freq: {}", freq);
-        Ok(())
-    }
-}
 
 //  bool inval = false;
 //  char c = serial.read();
@@ -162,11 +155,12 @@ impl Clockable for Dummy {
 //  return freq;
 
 // fn rf<T: embedded_hal::serial::Read<u8>>(serial: &mut T) -> u32 { 0 }
-fn read_freq<T: _esp_hal_uart_Instance>(serial: &mut Uart<'_, T>) -> u32 {
+fn read_freq<T: _esp_hal_uart_Instance>(serial: &mut Uart<'_, T>, delay: &mut Delay) -> u32 {
     let mut freq = 0;
     let mut invalid = false;
     loop {
-        match nb::block!(serial.read()) {
+        //match nb::block!(serial.read()) {
+        match serial.read() {
             Ok(input) if input >= b'0' && input <= b'9' => {
                 log::debug!("Got char: {}", char::from(input));
                 freq = (freq * 10) + (input - b'0') as u32;
@@ -188,9 +182,12 @@ fn read_freq<T: _esp_hal_uart_Instance>(serial: &mut Uart<'_, T>) -> u32 {
                 log::debug!("Got inval: {}", char::from(input));
                 invalid = true;
             }
-            Err(e) => {
+            Err(nb::Error::Other(e)) => {
                 log::debug!("Got error: {:?}", e);
             }
+            Err(nb::Error::WouldBlock) => {
+                delay.delay(10);
+            }
         }
     }